Zoom B2FOUR User Manual

Setting the stop mode
How the looper behaves when stopped can be set.
1. Turn on the Looper Effect Setting Screen (→Setting the looper effect).
Setting Explanation
INSTANT The loop will stop immediately after a stop operation.
FINISH The loop will stop after playing to its end.
FADE OUT The loop will stop playing after fading out.
Adjusting the volume
The looper volume can be adjusted.
1. Turn on the Looper Effect Setting Screen (→Setting the looper effect).
HINT:
This can be set from 0 to 100.
67

Zoom B2FOUR Specifications

General

Type	Bass Multi-Effects Processor
Simultaneous Effects	5
MIDI I/O	No
USB	1 x USB-C
Looper	Yes
Inputs	1 x 1/4" (instrument)
Outputs	1 x 1/4" (main out)
Power Source	4 x AA batteries
Headphones	1 x 1/8"