Zoom Cable Modem/Router User Manual


103
Table 31. IPSec Menu Option
Option Description
Tunnel
This is a pull-down list of VPN Names defined below. Select the
specific VPN tunnel to configure.
Name
Enter a VPN name and click Add New Tunnel.
Local Endpoint
Settings
Configure the local network located at your Cable
Modem/Router’s AN side.
Address Group Type
Define the local address type. Select IP Subnet to protect the
whole subnet; select Single IP address to protect a single PC or
device; select IP address range to protect several PCs, or
devices.
Subnet
Enter the subnet scale for address group.
Mask
Enter the subnet mask for address group.
Identity Type
Select the type to identify the Cable Modem/Router. The
choices are:WAN IP address, LAN IP address, FQDN (Fully
Qualified Domain Name) or Email address.
Identity
Enter the value corresponding to the selected identity type.
Remote Endpoint
Settings
Record the parameters of the network on which the peer VPN is
located.
Address Group Type
Define the local address type. Select IP Subnet to protect the
whole subnet; select Single IP address to protect a single PC;
select IP address range to protect several PCs.
Subnet
Enter the subnet for address group.
Mask
Enter the subnet mask for address group.
Identity Type
Select the type to identify the Cable Modem/Router. The
choices are WAN IP address, IP address, FQDN or Email
address.
Identity
Enter the value corresponding to the selected identity type.
Network Address
Type
Enter the IP address or domain name of the peer VPN Cable
Modem/Router. You can select IP address, which is typically
suitable for static public IP addresses or FQDN, which is
typically suitable for dynamic public IP address.
Remote Address
Enter IP address according to the Network Address Type.

Zoom Cable Modem/Router Specifications

General

Brand	Zoom
Model	Cable Modem/Router
Category	Network Router
Language	English