EasyManuals Logo

Zoom Cable Modem/Router User Manual

Zoom Cable Modem/Router
115 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #108 background imageLoading...
Page #108 background image
108
Table 32. L2TP/PPTP Menu Option
Option Description
PPP Address Range
(Start/End)
Configure the dedicated IP address pool for L2TP/PPTP. The
LAN IP subnet at one end of the VPN tunnel must be different
from the LAN
IP subnet at the other end of the VPN tunnel. For example, if
one side’s LAN subnet is 192.168.0.x, then the other side
should be 192.168.1.x (where the subnet mask in this
example is 255.255.255.0).
PPP Security (MPPE
Encryption)
Select Enable to enable MPPE (Microsoft Point-to-Point
Encryption). MPPE is used to enhance the confidentiality of
PPP-encapsulated packets. It uses the RSA RC4 encryption
algorithm.
Username
Enter the user name for the L2TP or PPTP tunneling.
Password
Enter the password for the L2TP or PPTP tunneling.
Confirm Password
Re-enter to confirm the password.
User List
Show the existing user list.
L2TP Server
(Preshared Phrase)
Enter a key (Pre-Shared key) for authentication. This key is
used by IPSec to validate the computer as a trusted machine.
Event Log
The Event Log page shows the VPN event log.
To access the Event Log page:
1 Click VPN in the menu bar.
2 Then click the Event Log submenu.
Figure 37 shows an example of the menu and Table 33 describes the
items you can
select.

Table of Contents

Other manuals for Zoom Cable Modem/Router

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Zoom Cable Modem/Router and is the answer not in the manual?

Zoom Cable Modem/Router Specifications

General IconGeneral
BrandZoom
ModelCable Modem/Router
CategoryNetwork Router
LanguageEnglish

Related product manuals