6. Press .
This opens the Recording Standby Screen.
7. Press when the Recording Standby Screen is open.
Automatic recording standby will start and the REC indicator will light red.
Recording will start automatically when the input level set in step 5 is exceeded. The Recording Screen
will be shown after the name of the file being recorded is shown. (→ Recording)
NOTE
• This cannot be used with the self timer. When automatic recording is enabled, the self-timer will be
disabled. (→ Setting the self-timer)
• When the Recording Standby Screen is open, pressing will start recording regardless of the input
level.
42
To Next Page
Loading...
