Enabling the recording start tone
Half-second tone signals (recording start tones) can be output from the PHONE/LINE OUT jack when
recording is started.
Since recording start tones are also written to recording files, when recording audio for video with the
H1essential, sending its output signal to the camera input can make synchronizing audio and video easier.
1. Press when the Home Screen is open.
This opens the Menu Screen.
2. Use / to select “Rec Settings” and press to confirm.
3. Use / to select “Rec Start Tone” and press to confirm.
4. Use / to select the recording start tone volume and press to confirm.
The following volumes can be selected.
Off, –40 dB, –20 dB
No recording start tone will be played if “Off” is selected.
43
To Next Page
Loading...
