6. Press .
This starts a countdown.
❶
Countdown (seconds)
Recording will start automatically after the time set in step 4 passes. The Recording Screen will be
shown after the name of the file being recorded is shown. (→ Recording)
NOTE
• This cannot be used with the pre-recording function. When the self-timer is enabled, pre-recording will be
disabled. (→ Capturing audio before recording starts (pre-recording))
• This cannot be used with the automatic recording function. When the self-timer is enabled, automatic
recording will be disabled. (→ Recording automatically (Auto Rec))
HINT
• During the countdown, can be pressed to start recording immediately.
• During the countdown, can be pressed to cancel it.
46
To Next Page
Loading...
