5. Use to start the timer.
This starts the countdown, and the REC indicator will blink.
❶
Countdown (minutes: seconds)
Recording will start when the countdown finishes. The Recording Screen will be shown after the name
of the file being recorded is shown.
NOTE
When using the recording delay timer, automatic recording, pre-recording and the self-timer cannot be
used. (→ Capturing audio before recording starts (pre-recording), Recording automatically (Auto Rec), Setting
the self-timer)
HINT
• During the countdown, can be pressed to start recording immediately.
• During the countdown, can be pressed to cancel it.
48
To Next Page
Loading...
