Zoom player 3000 - Page 41

■ Parameter 1 TYPE (Effect Type)
The following four effect types can be selected for
the EQ effect module.
Type 1 3-BAND EQ
Type 2 PHASE (Phaser)
Type 3 PEDAL-WAH
Type 4 AUTO-WAH
Depending on the selected effect type, the content of
parameters 2 - 7 changes.
■ Type 1 3-BAND EQ
This 3-band equalizer allows adjusting the high-
frequency range, mid-frequency range, and low-
frequency range.
●Parameter 2 High
Controls boost/cut for the high-frequency range.
●Parameter 3 Midf
The midrange frequency can be selected from the
following values: 0.2 (250 Hz), 0.4 (400 Hz), 0.8
(800 Hz), 1.2 (1.25 kHz), 2.0 (2 kHz), 3.1 (3.15
kHz), 5.6 (5.6 kHz), 8.0 (8 kHz).
●Parameter 4 MidG
Determines boost/cut for the mid-frequency range.
●Parameter 5 Low
Controls boost/cut for the low-frequency range.
●Parameter 6 Level (←RTM))
Determines the module output level.
A setting of "25" yields flat response.
●Parameter 7 EQ RTM
Determines the change direction and control range
for the parameter marked with "←RTM".
■ Type 2 PHASE (Phaser)
Adds a phase-shifted effect component to the direct
sound, creating a special undulating sound.
●Parameter 2 Depth
Determines the depth of the phaser effect.
●Parameter 3 Rate (←RTM)
Determines the speed of the phaser effect.
●Parameter 4 Reso
Determines the resonance component of the phaser
effect.
●Parameter 5 Stage
Determines the number of stages for the phaser
effect. When set to "8", a detailed phaser effect is
achieved.
●Parameter 6 Level
●Parameter 7 EQ RTM
■ Type 3 PEDAL-WAH
This effect type allows use of the optional remote
pedal RP01 or the FUNCTION switch of the 3000
for pedal wah.
●Parameter 2 High
Controls boost/cut for the high-frequency range.
●Parameter 3 f
Determines the initial frequency (when pedal is not
operated).
●Parameter 5 Low
Controls boost/cut for the low-frequency range.
●Parameter 6 Level
●Parameter 7 EQ RTM
Determines the direction in which the wah effect
changes when the pedal is pressed. "dn" means a
downward change and "UP" an upward change.
39 ●
ADVANCED GUITAR EFFECTS PROCESSOR
Parameter 1
TYPE
1. 3-BAND EQ 2. PHASE 3. PEDAL-WAH 4. AUTO-WAH
Parameter 2
High Depth High Depth
−12〜＋12 0〜10 −12〜＋12 1〜10
Parameter 3
Midf Rate(←RTM) f Sens(←RTM)
0.2/0.4/0.8/1.2/2.0/3.1/5.6/8.0 1〜50 1〜50 1〜10
Parameter 4
MidG Reso Reso
−12〜＋12 0〜10 1〜3
Parameter 5
Low Stage Low Inv
−12〜＋12 4,8 −12〜＋12 dn,UP
Parameter 6
Leve(←RTM) Level
1〜30 1〜30
Parameter 7
EQRTM EQRTM EQRTM
−10〜＋10 oF,dn,UP −10〜＋10
EQ
Effect Types and Parameters
This effect module comprises a 3-band equalizer, phaser, and wah effects.