Zte H1600 - Configure the DDNS

42
SJ-20210621164956-008 | 2022-09-01(R1.3)
ZTE H1600 Maintenance Management Guide
Table 4-14 lists the parental controls parameters.
Table 4-14 Parental Controls Parameters
Parameter
Description
On/Off
Click On to enable the parental controls function.
Name
The name of parental control.
User Identity
Configure the user information according to the IP address or MAC
address.
If the All user option is selected, all the users that use the ZTE
H1600 device are included.
Days
Specify the days when the parent control settings are applied.
Duration
Specify the time when the parent control settings are applied.
Action
The device supports:
⚫
Ban Internet Access
After this mode is selected, Internet access is not allowed.
⚫
URL Black List
After this mode is selected, websites set in URL are filtered out,
and cannot be visited.
⚫
URL White List
After this mode is selected, only websites set in URL can be ac-
cessed.
3. Click Apply button to apply the changes.
4.6 Configure the DDNS
The section describes how to configure DDNS. DDNS provides the parameters of DDNS
configuration function.
1. On the main page of the ZTE H1600, select Internet > DDNS to open the DDNS
page, see Figure 4-23.
Steps