Zte H1600 - Configure the Routing(Ipv6)

62
SJ-20210621164956-008 | 2022-09-01(R1.3)
ZTE H1600 Maintenance Management Guide
Figure 5-21 Policy Routing Page
2. Configure the policy routing parameters. Table 5-10 lists the policy routing parame-
ters.
Table 5-10 Parameter Descriptions for the Policy Routing
Parameter
Description
Name
The name of Policy routing entry.
Egress
WAN or LAN connection for policy routing
Source IP Address
Source IPv4 address of the matching packets.
Source Mask
Source mask of the matching packets.
Destination IP Address
Destination IPv4 address of the matching packets.
Destination Mask
Destination mask of the matching packets.
Protocol
Matching IPv4 protocol. The ANY option means any IPv4 proto-
col.
Source Port
Source port number of the matching packets.
Destination Port
Destination port number of the matching packets.
Source MAC Address
MAC address of the source device that sends the matching pack-
ets.
3. Click Apply button to apply the changes.
5.4.2 Configure the Routing(IPv6)
The section describes how to configure Routing(IPv6).