SJ-20210621164956-008 | 2022-09-01(R1.3)
5 Configure the Local Network
Figure 5-19 Routing Table Page
3.
Click Refresh to refresh the information.
Configure the Static Routing
1.
Click Static Routing to open the configuration page, see Figure 5-20.
Figure 5-20 Static Routing Page
2.
Configure the static routing parameters.Table 5-9 lists the static routing parameters.
Table 5-9 Parameter Descriptions for the Static Routing
The name of static routing entry.
WAN or LAN connection for static routing.
IPv4 address of the destination network.
Subnet mask of the destination network.
The next-hop IPv4 address to the destination network.
3.
Click Apply button to apply the changes.
Configure the Policy Routing
1.
Click Policy Routing to open the configuration page, see Figure 5-21.
To Next Page
Loading...
