ZTE H1600 Maintenance Management Guide
Figure 5-5 LAN Client Status
6.
Click the USB Storage Status and then check the USB storage status, see Figure
5-6 and click Refresh to refresh the information.
Figure 5-6 USB Status
5.2
Configure the WiFi
5.2.1
Configure the WiFi Basic Settings
The section describes how to configure WiFi basic settings:
⚫
WiFi on/off configuration: WiFi mode, WiFi(2.4GHz) switch, WiFi(5GHz) switch.
⚫
WiFi global configurations: Band width, transmitting power, etc.
⚫
WPS Push Button: WPS function
⚫
WiFi SSID Configuration: SSID name, encryption type, maximum clients,etc.
Configure the WiFi On/Off
To Next Page
Loading...
