Zte H1600 - Page 71

SJ-20210621164956-008 | 2022-09-01(R1.3)
63
5 Configure the Local Network
The relevant information of Internet status includes Routing Table, Static Routing and
Policy Routing.
Before configuring routing(IPv6), make sure that the IPv6 WAN connection is created.
Check the Routing Table
1. On the main page of the ZTE H1600, select Local Network > Routing > IPv6 to
open the Routing(IPv6) page.
2. Click Routing Table to view the routing table, see Figure 5-22.
Figure 5-22 Routing Table Page
3. Click Refresh to refresh the information.
Configure the Static Routing
1. Click Static Routing to open the configuration page, see Figure 5-23.
Figure 5-23 Static Routing(IPv6) Page
2. Configure the static routing parameters. Table 5-11 lists the static routing parame-
ters.
Prerequisite
Steps