Zte ZXR10 ZSR V2 - Configuring NTP; Figure 10-2 NTP Server and Client

ZXR10ZSRV2CongurationGuide(SystemManagement)
NTPSever
AfteradeviceisconguredtobeNTPserver,itwillmonitortheNTPtimerequestpackets
comingfromtheclientatNo.123UDPport,additstimeinformationtoNTPtimeresponse
packetandsendthepackettotheclient.
ZXR10ZSRV2canactasNTPserverandclientandthesametime.Thatistosay,itcan
receivetimerequestpacketscomingfromotherserversandsenditsowntimeinformation
tootherclients,seeFigure10-2.
Figure10-2NTPServerandClient
10.1.2ConfiguringNTP
ThisproceduredescribeshowtoconguretheNTPserverandNTPclientfunctionson
theZXR10ZSRV2.
Steps
1.ConguretheNTPServerfunction.
StepCommandFunction
1ZXR10(config)#ntpenableEnablestheNTPfunction.
2ZXR10(config)#ntpmaster<stratum>CongurestheNTPserver
level,range:1–15.The
smallerthevalue,the
morereliabletheNTPtime
publishedbytheserver.
2.ConguretheNTPClientfunction.
StepCommandFunction
1ZXR10(config)#ntpenableEnablestheNTPfunction.
2ZXR10(config)#ntpserver[{vrf<vrf-name>|
mng]<ip-address>priority<lever>[version
<number>]|[key<key-number>]|[lock|unlock]
Denesatimeserveronthe
client.TheIPaddressand
priorityarerequired.Other
parametersareoptional.
10-2
SJ-20140504150128-007|2014-05-10(R1.0)ZTEProprietaryandCondential