Zte ZXR10 ZSR V2 - LLDP Configuration Examples; LLDP Neighbor Configuration Example

Chapter14LLDPConguration
StepCommandFunction
3ZXR10(config-lldp-if-interface-name)#lldp-tx
{enable|disable}
Enables/DisablesLLDPsend
functioninaninterface.
4ZXR10(config-lldp-if-interface-name)#maxne
ighbor<num>
Thisconguresthemaximum
numberofneighborsthatcanbe
discoveredbyLLDP ,intherange
of1-8,withthedefaultvalueof8.
3.Verifythecongurations.
CommandFunction
ZXR10#showlldp{config[interface<interface-name>]|
entry[interface<interface-name>]|neighbor[interface
<interface-name>]|statistic[interface<interface-name>]}
ThisshowsLLDPconguration
information,detailedneighbor
information,briefneighbor
informationandstatistical
information.
4.MaintaintheLLDP .
CommandFunction
ZXR10#debuglldp{adjacency|event|packets[receive
|send]|all}
ThisshowsLLDPrelatedinformation,
eventinformationandpackets
sendingandreceivinginformation.
ZXR10(config-lldp)#clearneighborThisclearsanLLDPneighbor
relationshipthathasbeenestablished.
ZXR10(config-lldp)#clearstatisticThisclearsLLDPstatistical
information.
ZXR10(config-if-interface-name)#clearneighborThisclearsanLLDPneighbor
relationshipthathasbeenestablished
onaninterface.
ZXR10(config-if-interface-name)#clearstatisticThisclearsLLDPstatistical
informationonaninterface.
–EndofSteps–
14.3LLDPCongurationExamples
14.3.1LLDPNeighborConfigurationExample
CongurationDescription
AsshowninFigure14-2,itisrequiredtocongureLLDPongei-1/1ofR1.
14-5
SJ-20140504150128-007|2014-05-10(R1.0)ZTEProprietaryandCondential