Zte ZXR10 ZSR V2 - Page 144

ZXR10ZSRV2CongurationGuide(SystemManagement)
StepCommandFunction
ZXR10(config-lldp)#hellotime<times>Thiscongurestheintervalto
sendLLDPneighbordiscovery
packets.Itisintheunitofsecond,
anditisintherangeof5–32768,
thedefaultvalueis30.
ZXR10(config-lldp)#holdtime<time>Thisconguresthehold-timeof
anLLDPneighbor.The<times>
parameterisamultipleofthe
intervaltosendLLDPneighbor
discoverypackets.Itisinthe
rangeof2–10,andthedefault
valueis4.
2
ZXR10(config-lldp)#maxneighbor<num>Thisconguresthemaximum
numberofneighborsthatcanbe
discoveredbyLLDP ,intherange
of1–128,withthedefaultvalueof
128.
3ZXR10(config-lldp)#lldp{enable|disable}Enables/DisablesLLDPfunction.
4ZXR10(config-lldp)#lldp-rx{enable|disable}Enables/DisablesLLDPfunction.
5ZXR10(config-lldp)#lldp-tx{enable|disable}Enables/DisablesLLDPsend
function.
ZXR10(config-lldp)#txcreditmax<credit>Thisconguresthemaximum
creditnumber,intherangeof
1-10,withthedefaultvalueof5.
ZXR10(config-lldp)#txfastinit<num>Thisconguresthepackets
numberoffasttransmit,inthe
rangeof1-8,withthedefaultvalue
of4.
6
ZXR10(config-lldp)#msgfasttx<interval>Thiscongurestheintervaloffast
transmitpackets,intherangeof
1-3600,withthedefaultvalueof
1s.
2.CongureLLDPininterfacecongurationmode.
StepCommandFunction
1ZXR10(config-lldp-if-interface-name)#lldp
{enable|disable}
Enables/DisablesLLDPinan
interface.
2ZXR10(config-lldp-if-interface-name)#lldp-rx
{enable|disable}
Enables/DisablesLLDPreceive
functioninaninterface.
14-4
SJ-20140504150128-007|2014-05-10(R1.0)ZTEProprietaryandCondential