Zte ZXR10 ZSR V2 - LLDP Attribute Configuration Example; Figure 14-2 LLDP Neighbor Configuration Example; Figure 14-3 LLDP Attribute Configuration Example

ZXR10ZSRV2CongurationGuide(SystemManagement)
Figure14-2LLDPNeighborCongurationExample
CongurationFlow
1.EnterLLDPcongurationmode.
2.Enteraninterface.
3.EnableLLDP .
CongurationCommand
EnteraninterfaceinLLDPcongurationmodeandthencongureLLDP ,asshownbelow.
R1(config)#lldp
R1(config-lldp)#interfacegei-1/1
R1(config-lldp-if-gei-1/1)#lldpenable
R1(config-lldp-if-gei-1/1)#end
CongurationVerication
Usetheshowlldpneighborcommandtocheckthecongurationresult,asshownbelow.
R1(config)#showlldpneighbor
CapabilityCodes:
N-Other,r-Repeater,B-Bridge,W-WLANAccess
Point,
R-Router,T-Telephone,D-DOCSISCableDevice,
S-StationOnly
Local-PortChassis-IDHoldtimeCapabilityPlatformPeer-Port
---------------------------------------------------------------------------
gei-1/10023e4221134103BR6800v1.00.20gei-1/1
14.3.2LLDPAttributeConfigurationExample
CongurationDescription
AsshowninFigure14-3,itisrequiredtocongureLLDPattributesonR1.
Figure14-3LLDPAttributeCongurationExample
14-6
SJ-20140504150128-007|2014-05-10(R1.0)ZTEProprietaryandCondential