Zte ZXR10 ZSR V2 - Figure 10-5 Physical POS Interface Clock Configuration Instance

ZXR10ZSRV2CongurationGuide(SystemManagement)
Figure10-5PhysicalPOSInterfaceClockCongurationInstance
CongurationFlow
1.Inter-connecttherouters.
2.EnterPOS-interfaceclockcongurationmode.
CongurationCommand
CongurationsonrouterR1:
R1(config)#interfacepos3-1/1
R1(config-if-pos3-1/1)#noshutdown
R1(config-if-pos3-1/1)#clockmodeline
R1(config-if-pos3-1/1)#exit
CongurationsonrouterR2:
R2(config)#interfacepos3-1/1
R2(config-if-pos3-1/1)#noshutdown
R2(config-if-pos3-1/1)#exit
/*Threeclockmodescanbeconfiguredfortwoendsofthedirectly-connectedPOSinterface:
internal——internal,internal——line,line——internal.
Notethattheline——linemodeisunavailable.
CongurationVerication
Afterthecongurationiscompleted,runtheshowcommandtoverifythecongurations:
R1(config-if-pos3-1/1)#showinterfacepos3-1/1
pos3-1/1isdown,lineprotocolisdown
Descriptionisnone
HardwareisPacketOverSONET/SDH
Internetaddressisunassigned
IPMTU4470bytes
MTU4600bytes
BW155520Kbits
MPLSMTU4470bytes
PhysicallayerisPacketover(SDH)
Holdtimeis120sec(s)
CRC32
Loopbackcancel
ClockSource:line
Scrambleenable
EncapsulationPPP
10-8
SJ-20140504150128-007|2014-05-10(R1.0)ZTEProprietaryandCondential