Zte ZXR10 ZSR V2 - Figure 15-17 Multicast Ping Configuration Example

ZXR10ZSRV2CongurationGuide(SystemManagement)
<ttl>:TTL,range:1–255.
<don't-frag>:agindicatingnofragmentation,options:0,1,default:0(indicatingthat
fragmentationisallowed).
<pad>:valueofthepadeldinapacket.
option:whethertocongureIPoptions.Thevalue1meansthatIPoptionscanbe
congured.
<limite-num>:numberofpingpacketssentpersecond.
<interval-seconds>:intervalbetweentwodatarequestpackets,unit:second,range:2–10.
loose|strict<source-route-address>:speciedsourcestationroute,format:dotteddecimal.
<record-hops>:maximumnumberofhopsthatneedstoberecorded,range:1–9.
<record-timestamps>:maximumnumberoftimestampsthatneedstoberecorded,range:
1–9.
MaintenanceCommands
TomaintainmulticastpingontheZXR10ZSRV2,runthefollowingcommand:
CommandFunction
ZXR10#mtrace<source-address>[<destination-address
>][<group-address>]
Displaysinformationonsentmulticastping
packetsandreceivedICMPpacketswhen
multicastpingisperformed.
CongurationExample
lCongurationDescription
AsshowninFigure15-17,itisrequiredtocheckwhetherthemulticastlasthopis
reachable.
Figure15-17MulticastPingCongurationExample
lCongurationFlow
1.Buildanetwork.
2.EnablePIM-SMonR1andR2.
3.Addthereceivinggrouptothemulticastgroup.
4.PingthemulticastgroupaddressonR1.
lCongurationCommands
RunthefollowingcommandsonR1:
R1(config)#interfacegei-1/9
R1(config-if-gei-1/9)#noshutdown
15-28
SJ-20140504150128-007|2014-05-10(R1.0)ZTEProprietaryandCondential