Zte ZXR10 ZSR V2 - Page 13

Chapter1DeviceConnectionmanagement
CommandFunction
ZXR10(config)#linetelnetserverenable[listen
{<23>|<49152-65535>}]
Allowsterminalstologinto
thisrouterinTelnetmode,and
allowsthespecicationofaport
number.
3.(Optional)RunthetelnetcommandontheZXR10ZSRV2tologintoanotherdevice
throughthelocalclient.
Fortheformatofthetelnetcommand,refertothefollowingtable:
CommandFunction
ZXR10#telnet{<dest-ipaddress>[vrf<vrf-name>][<
source-ipaddress>][<port-number>]|<domainname>[vrf<vrf-n
ame>][<port-number>]}
Conguresthisrouterasaclient
tologintoanotherdevice.
<port-number>:TransferControl
Protocol(TCP)portnumber
(range:0–65535).
4.Verifythecongurations.
CommandFunction
ZXR10#showterminalDisplaysinformationonthe
currentterminal.
ZXR10#showhistoryDisplaysthelasttenhistory
commands.
ZXR10#showusersDisplaystheloginuser
information.
ZXR10#whoDisplaystheloginuser
information.
5.MaintainT elnetconnections.
CommandFunction
ZXR10(config)#linetelnetserverdisableForbidsterminalsfromloggingin
tothisrouterinT elnetmode.
ZXR10#clearlinevty<vty-number>Forcesthevtyusertologout.
<vty-number>:speciesthe
terminalnumber(range:0–14).
–EndofSteps–
Example
ThefollowingprovidesaT elnetconnectioncongurationexample.
1-5
SJ-20140504150128-007|2014-05-10(R1.0)ZTEProprietaryandCondential