Zte ZXR10 ZSR V2 - Configuring NDP

ZXR10ZSRV2CongurationGuide(SystemManagement)
Steps
1.CongureMIM.
CommandFunction
ZXR10#configureexclusiveCongurestheexclusive
function.
ZXR10#commit-mode{automatic|manual}Setsthecommitmode
(automatic-commitmodeor
manual-commitmode)for
congurationcommands.
Default:automatic-commit.
ZXR10#commitCommitstheconguration.
ZXR10#rollbackRollsbackacongurationthat
hasnotbeencommittedorhas
failedtobecommitted.
Note:
Ifaterminalisconguredwiththemanual-commitmodeandhascongurationsthat
havenotbeencommitted,normalcongurationofotherterminalsmaybeaffected.
2.Verifycongurations.
CommandFunction
ZXR10#showcommit-modeDisplaysthecommitmode.
ZXR10#showuncommitted-commandDisplaysalltheuncommittedcommands
ofthecurrentcongurationterminal.
ZXR10#showcommit-failedDisplaysthecongurationcommandsthat
thecurrentterminalhasfailedtocommitin
manual-commitmode.
ZXR10#showconfigureexclusiveDisplaysexclusiveinformation.
–EndofSteps–
Example
ThefollowingprovidesaMIMcongurationexample.
lCongurationDescription
Enterabatchofcongurationcommandsbyrunningascript.Takecaretoavoid
congurationcollision.
3-2
SJ-20140504150128-007|2014-05-10(R1.0)ZTEProprietaryandCondential