Need help?Do you have a question about the Zynq ZedBoard and is the answer not in the manual?
General| Processor | Dual-core ARM Cortex-A9 |
|---|---|
| Clock Speed | 667 MHz |
| System Memory | 512 MB DDR3 |
| Flash Memory | 256 MB |
| Video Output | HDMI, VGA |
| Storage | SD Card Slot |
| FPGA | Xilinx Zynq-7000 XC7Z020 |
| Ethernet | 10/100/1000 Mbps Ethernet |
| USB | USB 2.0 (OTG and Host) |
| Audio | 3.5mm jack, HDMI |
| Expansion Connectors | FMC, Pmod |
| Power | 5V DC |
Overview of Zynq bank pin assignments and detailed I/O connections.
Description of the ZedBoard, its features, and capabilities.
Details about the Xilinx Zynq XC7Z020-1CSG484 EPP and silicon grades.
Information on DDR3, SPI flash, and SD card interfaces for data storage.
Details on USB OTG, USB-to-UART bridge, and USB-JTAG interfaces.
Information on HDMI output, VGA connector, and I2S audio codec.
Details on clock sources and reset mechanisms for system control.
Information on push buttons, DIP switches, and user LEDs for interaction.
Details on the 10/100/1000 Ethernet PHY for network connectivity.
Information on LPC FMC, Pmod, and AMS connectors for extensibility.
Details on Zynq boot process and configuration options, including JTAG.
Information on power input, regulators, sequencing, estimation, and probes.
Default voltage assignments for Zynq PS and PL banks.
To Next Page