ZyXEL Communications AG-225H - Access Point Mode; Changing AG-225 H V2 Mode; Figure 3 Application: Access Point Mode; Figure 4 Zyxel Utility: Change Modes

ZyXEL AG-225H v2 User’s Guide
Chapter 1 Getting Started 21
1.2.2 Access Point Mode
You can also set the AG-225H v2 to access point mode. This allows you to set up your
wireless networks without using a dedicated AP. The following figure shows a network
example.
Figure 3 Application: Access Point Mode
In the example, the AG-225H v2 is installed on computer A and set to operate in access point
mode. Computer A provides an Internet connection to the wireless LAN, so wireless stations
B and C can access the Internet.
1.2.3 Changing AG-225H v2 Mode
To change between the modes, select either Station Mode or AP Mode in any ZyXEL utility
screens.
Figure 4 ZyXEL Utility: Change Modes
Note: Wait for about five seconds for the ZyXEL utility to complete the mode change.
The current mode is indicated by the color of the check box.