ZyXEL Communications AG-225H - Figure 57 Windows XP SP2: Wireless Network Connection: WEP or WPA-PSK; Figure 58 Windows XP SP2: Wireless Network Connection: no Security; Table 27 Windows XP: Wireless Networks

ZyXEL AG-225H v2 User’s Guide
Appendix C 79
If there is no security activated for the selected wireless network, a warning screen
appears. Click Connect Anyway if wireless security is not your concern.
Figure 57 Windows XP SP2: Wireless Network Connection: WEP or WPA-PSK
Figure 58 Windows XP SP2: Wireless Network Connection: No Security
5 Verify that you have successfully connected to the selected network and check the
connection status in the wireless network list or the connection icon in the Preferred
networks or Available networks list.
The following table describes the connection icons.
Security Settings
When you configure the AG-225H v2 to connect to a secure network but the security settings
are not yet enabled on the AG-225H v2, you will see different screens according to the
authentication and encryption methods used by the selected network.
Association
Select a network in the Preferred networks list and click Properties to view or configure
security.
Table 27 Windows XP: Wireless Networks
ICON DESCRIPTION
This denotes the wireless network is an available wireless network.
This denotes the AG-225H v2 is associated to the wireless network.
This denotes the wireless network is not available.