ZyXEL Communications AG-225H - Figure 42 Access Point Mode: MAC Filter; Table 18 Access Point Mode: MAC Filter

ZyXEL AG-225H v2 User’s Guide
62 Chapter 5 Access Point Mode Configuration
Figure 42 Access Point Mode: MAC Filter
The following table describes the labels in this screen.
Table 18 Access Point Mode: MAC Filter
LABEL DESCRIPTION
Filter Type Define the filter action for the list of MAC addresses in the MAC address filter table.
Select Disable to deactivate the MAC filter feature.
Select Reject to block access to the AG-225H v2. MAC addresses not listed will be
allowed to access the AG-225H v2.
Select Accept to permit access to the AG-225H v2. MAC addresses not listed will
be denied access to the AG-225H v2.
Filter MAC
Address 1-16
Specify the MAC address(es) of the wireless station(s) that is allowed or denied
association to the AG-225H v2.
Enter six pairs of hexadecimal digits (separated by colons) in the range of “A-F”,
“a-f” and “0-9” (for example, 00:A0:C5:00:00:02).
If you enter an invalid MAC address, once you click Save to save the values, a
warning screen will be displayed.
Save Click Save to save the changes to the AG-225H v2.
Cancel Click Cancel to discard the changes.