ZyXEL AG-225H v2 User’s Guide
Chapter 4 Wireless Station Mode Configuration 39
CHAPTER 4
Wireless Station Mode
Configuration
This chapter shows you how to configure your AG-225H v2 in wireless station mode. See
Chapter 5 on page 57 for how to configure the AG-225H v2 in access point mode.
4.1 Wireless Station Mode Overview
To set your AG-225H v2 to wireless station mode, select Station Mode in any utility screen
(refer to Section 1.2.3 on page 21).
4.1.1 ZyXEL Utility Screen Summary
This section describes the ZyXEL utility screens when the AG-225H v2 is in station mode.
Figure 22 ZyXEL Utility Menu Summary: Station Mode
The following table describes the menus.
Table 2 ZyXEL Utility Menu Summary: Station Mode
TAB DESCRIPTION
Station Mode
Link Info Use this screen to see your current connection status, configuration and data rate
statistics.
Site Survey Use this screen to
• scan for a wireless network
• configure wireless security (if activated on the selected network).
• connect to a wireless network.
Profile Use this screen to add, delete, edit or activate a profile with a set of wireless and
security settings.
Adapter Use this screen to configure a transfer rate and enable power saving.
To Next Page
Loading...
