ZyXEL Communications AG-225H - The Profile Screen; Figure 30 Confirm Save Screen; Table 10 Confirm Save Screen

ZyXEL AG-225H v2 User’s Guide
48 Chapter 4 Wireless Station Mode Configuration
Figure 30 Confirm Save Screen
The following table describes the labels in this screen.
4.4 The Profile Screen
A profile is a set of wireless parameters that you need to connect to a wireless network. With a
profile activated, each time you start the AG-225H v2, it automatically scans for the specific
SSID and joins that network with the pre-defined wireless security settings. If the specified
network is not available, the AG-225H v2 cannot connect to a network.
If you do not configure and activate a profile, each time you start the AG-225H v2, the AG-
225H v2 uses the default profile to connect to any available network that has no security
enabled.
The default profile is a profile that allows you to connect to any SSID that has no security
enabled.
Table 10 Confirm Save Screen
LABEL DESCRIPTION
Security Setting
Network Name This field displays the SSID previously entered.
Network Type This field displays the network type (Infrastructure or Ad-Hoc) of the wireless
device.
Channel This field displays the channel number used by the profile.
Security This field shows whether data encryption is activated (WEP (WEP or 802.1x), WPA,
WPA-PSK, WPA2, WPA2-PSK) or inactive (DISABLE).
Back Click Back to return to the previous screen.
Save Click Save to save the changes to the AG-225H v2 and display the Link Info
screen.
Exit Click Exit to discard changes and return to the Site Survey screen.