ZyXEL Communications Dimension ES-3124 - Page 193

Dimension ES-3124 Ethernet Switch
Introduction to CLI 28-11
Table 28-2 Command Summary: sys sw
COMMAND DESCRIPTION
bmstorm
These commands relate to
broadcast storm control.
disable
Turns off broadcast storm
control.
enable
Turns on broadcast storm
control.
port <port> <type> <active(on|off)>
<threshold(pps)>
Sets broadcast storm control on
a port for a specific packet type
in packet per second (pps).
display
Displays broadcast storm control
ports’ settings.
mac static
Displays static MAC addresses.
disable
Clears current run-time static
MAC address settings
display [<mac> <vid>]
Displays current run-time static
MAC addresses on the ports.
set <port> <MAC> <vid>
Configures a static MAC address
on the specified port.
del <port> <MAC> <vid>
Deletes a static MAC address on
the specified port.
ageSet <timeout>
Sets aging timeout.
ageView
Displays the aging timeout
period.
list
Displays the forwarding table
entries.
count
Displays the number of MAC
addresses in the forwarding
table.
flush Port <port>
Deletes learned MAC addresses
on the specified port in the
forwarding table.
all
Deletes all learned MAC
addresses in the forwarding
table.
filter l2addr <enable> <mac><vid> <discardSrc>
<discardDst>
The following command relates
to port filters. Port filtering means
sifting traffic based on the source
and/or destination MAC
addresses and VLAN group.
mirror
The following commands relate
to port mirrors. Port mirroring is
copying traffic from one or all
ports to another or all ports for
external analysis.