Chapter 7 Wireless
LTE Series User’s Guide
107
WiFi Network Name The SSID (Service Set IDentity) identifies the service set with which a WiFi device is
associated.
WiFi devices associating to the access point (AP) must have the same
SSID.
Enter a descriptive name (up to 32 English keyboard characters) for the wireless LAN.
Hide SSID Select this check box to hide the SSID in the outgoing beacon frame so a station
cannot obtain the SSID through scanning using a site survey tool.
This check box is grayed out if the WPS function is enabled in the Network > Wireless
> WPS screen.
Guest WLAN Select the check box to enable Guest WLAN.
Access Scenario If you select Home Guest, clients connecting to the same SSID can communicate
with each other directly.
If you select External Guest, clients are blocked from connecting to each other
directly.
Max. Upstream Bandwidth Specify the maximum rate for upstream wireless traffic to the WAN from this WLAN in
kilobits per second (Kbps).
Max. downstream
Bandwidth
Specify the maximum rate for downstream wireless traffic to this WLAN from the WAN
in kilobits per second (Kbps).
BSSID This shows the MAC address of the wireless interface on the Zyxel Device when
wireless LAN is enabled.
BBSID Subnet Select Enable to create an independent subnet for the SSID, which is separated
from the LAN subnet(s).
DHCP Start Address Enter the first of the contiguous addresses in the IP address pool for the SSID subnet.
The Zyxel Device assigns IP addresses from this DHCP pool to wireless clients
connecting to the SSID.
DHCP End Address Enter the last of the contiguous addresses in the IP address pool for the SSID subnet.
SSID Subnet Mask Enter the subnet mask of the Zyxel Device for the SSID subnet.
LAN IP Address Enter the IP address of the Zyxel Device for the Guest SSID.
Security Level
Security Mode Select More Secure or WPA2-PSK to add security on this WiFi network. The WiFi
clients which want to associate to this network must have the same
WiFi security
settings as the Zyxel Device. When you select to use a security, additional options
appears in this screen.
Or you can select No Security to allow any client to associate with this network
without any data encryption or authentication.
See the following sections for more details about this field.
Generate password
automatically
Select this option to have the Zyxel Device automatically generate a password. The
password field will not be configurable when you select this option.
Table 32 Network Setting > Wireless > More AP Edit (continued)
LABEL DESCRIPTION
To Next Page
Loading...
