Chapter 13 Firewall
LTE Series User’s Guide
188
Figure 141 Security > Firewall > Protocol: Add New Protocol Entry
The following table describes the labels in this screen.
13.5 Access Control (Rules)
An Access Control List (ACL) rule is a manually-defined rule that can accept, reject, or drop incoming or
outgoing packets from your network. This screen displays a list of the configured incoming or outgoing
filtering rules. Note the order in which the rules are listed. Click Security > Firewall > Access Control to
display the following screen.
Note: The ordering of your rules is very important as rules are applied in turn.
Figure 142 Security > Firewall > Access Control
Table 68 Security > Firewall > Protocol: Add New Protocol Entry
LABEL DESCRIPTION
Service Name Type a unique name for your custom port.
Description Enter a description for your custom port.
Protocol Choose the protocol (TCP, UDP, ICMP, ICMPv6, or Other) that defines your customized port from
the drop down list box.
Protocol Number Type a single port number or the range of port numbers (0-255) that define your customized
service.
OK Click this to save your changes.
Cancel Click this to exit this screen without saving.
To Next Page
Loading...
