Chapter 9 Routing
LTE Series User’s Guide
157
9.3 DNS Route
Use this screen to view and configure DNS routes on the Zyxel Device. A DNS route entry defines a policy
for the Zyxel Device to forward a particular DNS query to a specific WAN interface. Click Network Setting
> Routing > DNS Route to open the DNS Route screen.
Figure 116 Network Setting > Routing > DNS Route
The following table describes the labels in this screen.
9.3.1 Add/Edit DNS Route
Click Add New DNS Route in the DNS Route screen, use this screen to configure the required information
for a DNS route.
Table 47 Network Setting > Routing > DNS Route
LABEL DESCRIPTION
Add New DNS
Route
Click this to create a new entry.
# This is the number of an individual DNS route.
Status This field indicates whether the rule is active (yellow bulb) or not (gray bulb).
Domain Name This is the domain name to which the DNS route applies.
WAN Interface This is the WAN interface through which the matched DNS request is routed.
Subnet Mask This parameter specifies the IP network subnet mask.
Modify Click the Edit icon to configure a DNS route on the Zyxel Device.
Click the Delete icon to remove a DNS route from the Zyxel Device.
To Next Page
Loading...
