Chapter 12 USB Service
LTE Series User’s Guide
182
12.2.1 Add New Share
Use this screen to set up a new share or edit an existing share on the Zyxel Device. Click Add New Share
in the File Sharing screen or click the Edit/Modify icon next to an existing share.
Please note that you need to set up your shares in the USB before enabling file sharing in the Zyxel
Device. Also, spaces and the following special characters listed in the brackets ["`<>^$|&;\/:*?'] are not
allowed for the USB share name.
Figure 137 Network Setting > USB Service > File Sharing > Add New Share
Share Name This field displays the name of the file you shared.
Share Path This field displays the location in the USB of the file you shared.
Share
Description
This field displays a description of the file you shared.
Modify Click the Edit icon to change the settings of an existing share.
Click the Delete icon to delete this share in the list.
Account Management
Add New User
Click this button to create a user account to access the secured shares. This button redirects you
to Maintenance > User Account.
Status
This field shows the status of the user.
: The user account is not activated for the share.
: The user account is activated for the share.
User Name
This is the name of a user who is allowed to access the secured shares on the USB device.
Cancel Click this to restore your previously saved settings.
Apply Click this to save your changes to the Zyxel Device.
Table 64 Network Setting > USB Service > File Sharing
LABEL DESCRIPTION
To Next Page
Loading...
