Chapter 12 USB Service
LTE Series User’s Guide
181
Figure 136 Network Setting > USB Service
Note: Share Directory List field appears when you connect a USB device to the USB port.
Otherwise, it does not.
Each field is described in the following table.
Table 64 Network Setting > USB Service > File Sharing
LABEL DESCRIPTION
Information
Volume This is the volume name the Zyxel Device gives to an inserted USB device.
Capacity This is the total available memory size (in megabytes) on the USB device.
Used Space This is the memory size (in megabytes) already used on the USB device.
Server Configuration
File Sharing
Services
Click this switch to enable or disable file sharing through the Zyxel Device. When the switch goes
to the right , the function is enabled. Otherwise, it is not.
Share Directory List
Add New Share Click this to set up a new share on the Zyxel Device.
Active Select this to allow the share to be accessed.
Status This field shows the status of the share
: The share is not activated.
: The share is activated.
To Next Page
Loading...
