LTE Series User’s Guide
48
CHAPTER 4
Tutorials
4.1 Overview
This chapter provides tutorials for setting up your Zyxel Device.
• Set Up a Wireless Network Using WPS
• Connect to the Zyxel Device’s WiFi Network
• Use Multiple SSIDs on the Zyxel Device
• Make a VoIP/VoLTE Phone Call
• Configure a Firewall Rule
• Configure MAC Filter
• Upgrade Firmware on the Zyxel Device
• Back up a Configuration File
• Restore Configuration
• Connect to the Internet
• Configure DHCP
• Configure Static Route for Routing to Another Network
• Access the Zyxel Device Using DDNS
4.2 Set Up a Wireless Network Using WPS
This section gives you an example of how to set up wireless network using WPS. This example uses the
Zyxel Device as the AP and a WPS-enabled Android smartphone as the wireless client.
There are two WPS methods for creating a secure connection via the web configurator or utility. This
tutorial shows you how to do both.
• Push Button Configuration (PBC) - create a secure wireless network simply by pressing a button. See
Section 4.2.1 on page 49. This is the easier method.
• PIN Configuration - create a secure wireless network simply by entering a wireless client's PIN (Personal
Identification Number) in the Zyxel Device’s interface. See Section 4.2.2 on page 50. This is the more
secure method, since one device can authenticate the other.
To Next Page
Loading...
