Chapter 15 Parental Control
LTE Series User’s Guide
200
Parental Control
Profile Name
Enter a descriptive name for the rule.
Home Network User Select the LAN user that you want to apply this rule to from the drop-down list box.
If you select Custom, enter the LAN user’s MAC address. If you select All, the rule
applies to all LAN users.
Rule List In Home Network User, select Custom, enter the LAN user’s MAC address, then click
the + sign to enter a computer MAC address for this PCP. Up to five are allowed.
Click the - sign to remove one.
Internet Access Schedule
Day Select the days that you want the Zyxel Device to perform parental control.
Time Drag the time bar to define the time that the LAN user is allowed access.
Add New Time Click this to add a new time bar. Up to three are allowed.
Network Service
Network Service
Setting
If you select Block, the Zyxel Device prohibits the users from viewing the Web sites
with the URLs listed below.
If you select Allow, the Zyxel Device blocks access to all URLs except the ones listed
below.
Add New Service Click this to show a screen in which you can add a new service rule. You can
configure the Add New Service, Protocol, and Port of the new rule.
# This shows the index number of the rule. Select the checkbox next to the rule to
activate it.
Protocol This shows the protocol of the rule. Choices are TCP, UDP, or TCP& UDP.
Port This shows the port of the rule.
Modify Click the Edit icon to go to the screen where you can edit the rule.
Click the Delete icon to delete an existing rule.
Site/URL Keyword
Block or Allow the
Web Site
If you select Block the Web URLs, the Zyxel Device prohibits the users from viewing
the Web sites with the URLs listed below.
If you select Allow the Web URLs, the Zyxel Device blocks access to all URLs except
the ones listed below.
# This shows the index number of the rule.
Website This shows the URL of web site or URL keyword to which the Zyxel Device blocks or
allows access.
Modify Click the Edit icon to go to the screen where you can edit the rule.
Click the Delete icon to delete an existing rule.
Add Click Add to show a screen to enter the URL of web site or URL keyword to which
the Zyxel Device blocks or allows access.
OK Click OK to save your settings back to the Zyxel Device.
Cancel Click Cancel to return to the previous screen without saving any changes.
Table 75 Parental Control > Parental Control > Add New PCP
LABEL DESCRIPTION
To Next Page
Loading...
