Chapter 23 VoIP Status
LTE Series User’s Guide
238
To Phone Port
Type
This field displays the phone ports type used to receive the current VoIP call. Three possible
type Type values will be displayed here: SIP - For the current call which is categorized as
Outgoing Call in the Call Type field, this field will show the type SIP. FXS and Unknown - As for
the other cases: Incoming Call and Internal Call, this field will show the corresponding local
phone port type: FXS, the legacy analog phone port on the device. While the call is
established, this field shows Unknown during the call setup phase (signaling phase). This is
because one or more local phone ports can be configured or designed to receive these two
types of calls, see the Call Type above, and the local phone port will answer the call that
hasn't been determined yet at that time.
Peer Number This field displays the SIP number of the party that is currently engaged in a VoIP call through a
phone port.
Phone Status
Phone This field displays the name of a phone port on the Device.
Outgoing Number This field displays the SIP number that you use to make calls on this phone port.
Incoming Number This field displays the SIP number that you use to receive calls on this phone port.
Hook Status This field displays whether the phone is in the on or off hook status.
Table 99 System Monitor > VoIP Status (continued)
LABEL DESCRIPTION
To Next Page
Loading...
