cac_tspec_ea
Get specific TSPEC for given STA with matching TSINFO
eg. 'wlctl cac_tspec 0xaa 0xbb 0xcc xx:xx:xx:xx:xx:xx'
where 0xaa 0xbb & 0xcc are TSINFO octets and xx is mac address
phy_txpwrindex
usage: (set) phy_txpwrindex core0_idx core1_idx core2_idx core3_idx (get) phy_txpwrindex,
return format: core0_idx core1_idx core2_idx core3_idxSet/Get txpwrindex
phy_test_tssi
wlctl phy_test_tssi val
phy_test_tssi_offs
wlctl phy_test_tssi_offs val
phy_rssiant
wlctl phy_rssiant antindex(0-3)
phy_rssi_ant
Get RSSI per antenna (only gives RSSI of current antenna for SISO PHY)
lpphy_papdepstbl
print papd eps table; Usage: wlctl lpphy_papdepstbl
rifs set/get the rifs status; usage: wlctl rifs <1/0> (On/Off)
rifs_advert
set/get the rifs mode advertisement status; usage: wlctl rifs_advert <-1/0> (Auto/Off)
phy_rxiqest
Get phy RX IQ noise in dBm:
-s # of samples (2^n)
-a antenna select, 0,1 or 3
-r resolution select, 0 (coarse) or 1 (fine)
-f lpf hpc override select, 0 (hpc unchanged) or 1 (overridden to lowest value)
-g gain-correction select, 0 (disable) or 1 (enable)
phy_txiqcc
usage: phy_txiqcc [a b]
Set/get the iqcc a, b values
phy_txlocc
usage: phy_txlocc [di dq ei eq fi fq]
Set/get locc di dq ei eq fi fq values
phytable
To Next Page
Loading...
