Displays the shortest message about XDSL PHY connection state, e.g.
xdsl: XDSL driver and PHY status
Status: Showtime Channel: FAST, Upstream rate = 8064 Kbps, Downstream rate = 1024 Kbps
--show :
Displays more statistics about XDSL connection.
--stats :
Displays all available statistics about XDSL connection.
--SNR :
Displays signal to noise ratio (SNR) per tone in dB
--QLN :
Displays Quiet Line Noise (QLN) per tone in dBm/Hz
--Hlog :
Displays Hlog (Channel Response) per tone in dB
--Hlin :
Displays Hlin (Channel Respose linear)
--HlinS :
Displays Hlin Scaled and corresponding Scaling Factors
--Bits :
Display Bit Allocation per tone
--pbParams :
Displays Per Band Parameters in VDSL2 mode. This includes Band plan information, Net Data rate,
TxPwr, per band LATN, SATN, SNRM.
--linediag :
Used in XDSL mode. Displays Line Diagnostic Results for XDSL mode including aggregate PMD
parameters such as SNRM, LATN, SATN, TxPwr, ATTNDR and per tone SNR, QLN, Hlog, HlinS
LOGDEST
NAME
logdest – Can be displays a application debug level
SYNOPSIS
To Next Page
Loading...
