[-m | --model]
DESCRIPTION
swversion is a CLI command used to view the current running software version.
EXAMPLES
Display current software version.
> swversion
4.04L.01
Display build timestamp
> swversion -b
091104_1517
Display DSL phy and driver version
> swversion –d
A2pB026.d22f
Display CPE Model name
> swversion -m
VMG1312-B10B
Display Bootloader (CFE) version
> swversion -c
1.0.38-112.118
SYSINFO
NAME
sysinfo – display the general system information
SYNOPSIS
sysinfo
DESCRIPTION
sysinfo displays the number of processes in the system, system time, system uptime, the average system
load in the past 1, 5 and 15 minutes, and the system memory consumption. The figures in the memory
consumption table are in 1kb unit.
COMMANDS
None.
To Next Page
Loading...
