logdest
DESCRIPTION
logdest will displays a application debug level, where appname is one of: httpd, http_ssl, tr69c, smd, ssk,
telnetd, sshd, consoled, upnp, dnsproxy
loglevel is "Standard Error", "Syslog" or "Telnet".
COMMANDS
usage:
logdest get appname
logdest set appname logdest
OPTIONS
None.
EXAMPLES
° Display the httpd debug level information.
> logdest get httpd
DNS
NAME
dns – configure or show the default dns server
SYNOPSIS
dns config auto
[<interface(s) sperated by ',' with NO SPACE. eg. ppp0 OR for multiple interfaces
ppp0,ppp1>]
dns config static
[<primary DNS> [<secondary DNS>]]
dns show
dns --help
DESCRIPTION
The primary use of dns command is to set up a static default dns server or static dns, or to retrieve the
default dns information automatically from remote ISPs through DHCP protocol for a IPOE interface or
through PPP protocol for a PPPoA or PPPoE interface. A PPPoA or PPPoE interface will always retrieve
remote gateway information automatically. This command will save configuration to the Permanent
Storage.
To Next Page
Loading...
