TR69C
NAME
tr69c –this command is setting connection Request Port.
SYNOPSIS
Usage:
tr69c ConnReqPort <Port>
tr69c show
DESCRIPTION
Tr69c this command is setting connection Request Port by CPE CLI mode.The tr69 protocol is a DSL
Forum (which was later renamed as Broadband Forum) technical specification entitled CPE WAN
Management Protocol (CWMP). It defines an application layer protocol for remote management of
end-user devices. The TR-069 standard was developed for automatic configuration of these devices with
Auto Configuration Servers (ACS).
OPTIONS
None
EXAMPLES
° Display the tr69c req port number
> tr69c show
° Setting tr69c req port number
> tr69c ConnReqPort 1700
WEBSTYLE
NAME
webstyle–this command is setting Web gui display type.
SYNOPSIS
Usage:
To Next Page
Loading...
