ZyXEL Communications VMG1312 - Xtm

116
ZyXEL Confidential
www.zyxel.com
This command can be used to get and setting udpecho service.You can specify some “Port”,”IP
Address”,”Interface”.
OPTIONS
None
EXAMPLES
° Display the udpechod information
> udpechod show
° Setting the udpechod connection destination
> udpechod set sourceip 172.21.1.1
° Setting the udpechod destination port
> udpechod set port 1172
XTM
NAME
xtm –Linux command line utility that controls the Broadcom BCM6368 ATM/PTM driver.
SYNOPSIS
Usage: xtmctl start
[--rq0 <size>]
[--rq1 <size>]
[--intf allint|allext|intext [negedge]]
[--bondingenable]
xtmctl stop
xtmctl restart
xtmctl operate tdte
[--add ubr|ubr_pcr <pcr>|cbr <pcr>|rtvbr <pcr> <scr> <mbs>|nrtvbr <pcr> <scr> <mbs>
|mbr <scr> [<mcr>]]
[--delete <index>]
[--show [<index>]]
xtmctl operate intf
[--state <port_id> enable|disable]
[--show [<port_id>]]
[--stats [<port_id>] [reset]]
xtmctl operate conn
[--add <port_mask.vpi.vci> aal5
llcsnap_eth|llcsnap_rtip|llcencaps_ppp|vcmux_eth|vcmux_ipoa|vcmux_pppoa