EXAMPLES
o Display the current Port mapping rule(virtual server)
> virtualserver show
o Disable the current Port mapping rule(virtual server)
> virtualserver disable 1-xxx
WLCTL
NAME
wlctl –This command available in the Broadcom WLAN client utility.
(refer by WLTool-80211-TI300-R.pdf)
SYNOPSIS
The command syntax is as follows:
wlctl [-a|i <adapter>] [-h] [-d|u|x] <command> [arguments]
usage:
-h is this message and command descriptions.
-h [cmd] is the command description for cmd.
-a, -i is the adapter name or number.
-d is the output format signed integer.
-u is the output format unsigned integer.
-x is the output format hexadecimal.
The [h,u] option is used only to print out the Help topic, and the [a|] option is needed only if you have
multiple adapters.
DESCRIPTION
Before you can begin using the utility to start a build, you must have the following tools available/installed
on your Linux build machine:
‧ New version of the Broadcom client driver Bills 4.10.47 or later
‧ The latest Broadcom BCM43XX WLAN adapter
‧ WindowsR or LinuxRoperating system
OPTIONS
ver
Returns the version information of the utility.
To Next Page
Loading...
