Syntax:
> wlctl ver
Example: 4.150 RC6.0 wl0: May 8 2007 20:35:49 version 4.150.6.0
cmds
Generates a short list of available commands.
Syntax:
> wlctl cmds
Example:
a_rate counters nvset set_pmk
a_mrate csscantimer nvget scan
ap closed nvram_get spect
atten closednet noise scanresults
list
Lists all installed wireless adapters.
Syntax:
> wlctl list
Example:
1: wl1 MAC: 00:90:4B:7A:7A:AC
xlist
Lists all installed network adapters.
Syntax:
> wlctl xlist
Example:
0: ??0 802.3 0035 {0159A4F2-4EC8-4F75-8DB8-A74547B9D1A5} MAC:
00:0F:1F:CE:91:AB
1: wl1 wireless 0012 {2611C167-BB4F-40FA-A6A7-890348F9E104} MAC:
00:90:4B:7A:7A:AC
join
Joins a specified network.
Syntax:
> join <name|ssid> [key xxxxx] [imode bss|ibss] [amode
open|shared|auto|wpa|wpapsk|wpanone|wpa2|wpa2psk]
Example: join Broadcom imode infra amode open
If the AP is not configured with Wired Equivalent Privacy (WEP) security, no WEP key is required.
Otherwise, specify either
wep xxxx
To Next Page
Loading...
