ZyXEL Communications VMG1312 - Loglevel

34
ZyXEL Confidential
www.zyxel.com
Default value is enable for the primary LAN interface.
--dhcpclient <enable|disable>
Options for the delete command
lan delete --ipaddr <primary|secondary>
--ipaddr <primary|secondary>
primary|secondary – specify which LAN interface will be deleted.
Valid values: primary or secondary.
Options for the show command
lan show [<primary|secondary>]
primary|secondary – specify which LAN interface will be shown.
Valid values: primary or secondary.
If it is omitted, all LAN interfaces are displayed.
EXAMPLES
° Configure a primary LAN interface.
> lan config –ipaddr primary 192.168.1.1 255.255.255.0
° Remove a secondary LAN interface.
> lan delete –ipaddr secondary
° Display all LAN interfaces.
> lan show
br0 Link encap:Ethernet HWaddr 02:10:18:01:00:01
inet addr:192.168.1.1 Bcast:192.168.1.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:42083 errors:0 dropped:0 overruns:0 frame:0
TX packets:107786 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:7412118 (7.0 MiB) TX bytes:34445874 (32.8 MiB)
br0:0 Link encap:Ethernet HWaddr 02:10:18:01:00:01
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
° Configure primary lan interface for DHCP client mode:
> lan config --dhcpserver disable
> lan config --dhcpclient enable
> save
LOGLEVEL
NAME