led_blink_sync
set/get led_blink_sync
Usage: wlctl led_blink_sync [0-3] [0/1]
cca_get_stats
Usage: wlctl cca_stats [-c channel] [-s num seconds][-a]
-c channel: Optional. specify channel. 0 = All channels. Default = current channel
-s num_seconds: Optional. Default = 10, Max = 60
-i: list individual measurements in addition to the averages
-curband: Only recommend channels on current band
itfr_get_stats
get interference source information
itfr_enab
get/set STA interference detection mode(STA only)
0 - disable
1 - enable maual detection
2 - enable auto detection
itfr_detect
issue an interference detection request
smfstats
get/clear selected management frame (smf) stats wlctl smfstats [-C num]|[--cfg=num]
[auth]|[assoc]|[reassoc]|[clear]
clear - to clear the stats
manfinfo
show chip package info in OTP
rrm_nbr_req
send 11k neighbor report measurement request
Usage: wlctl rrm_nbr_req [ssid]
wnm_bsstq
send 11v BSS transition management query
Usage: wlctl wnm_bsstq [ssid]
pm_dur
Retrieve accumulated PM duration information (GET) or clear accumulator (SET)
Usage: wlctl pm_dur <any-number-to-clear>
mpc_dur
Retrieve accumulated MPC duration information in ms (GET) or clear accumulator (SET)
Usage: wlctl mpc_dur <any-number-to-clear>
To Next Page
Loading...
