Line 0 DS HLOG (dB) (grouped by 8 tones):
0 : -96.0 -96.0 -96.0 -96.0 -96.0 -8.4 -7.1 -6.1 -5.5 -5.2
10 : -4.9 -4.8 -4.6 -4.5 -4.5 -4.4 -4.4 -4.5 -4.6 -4.7
. . .
Line 0 US HLOG (dB) (grouped by 8 tones):
0 : -96.0 -96.0 -96.0 -96.0 -96.0 -96.0 -96.0 -96.0 -96.0 -96.0
. . .
Line 0 DS QLN (dBm/Hz) (grouped by 8 tones):
0 : -160.0 -160.0 -160.0 -160.0 -160.0 -121.5 -119.5 -119.0 -118.0 -119.0
. . .
Line 0 US QLN (dBm/Hz) (grouped by 8 tones):
0 : -160.0 -160.0 -160.0 -160.0 -160.0 . . .
Line 0 DS SNR (dBm/Hz) (grouped by 8 tones):
0 : 0.0 0.0 0.0 0.0 0.0 53.4 54.4 56.2 56.7 . . .
Line 0 US SNR (dBm/Hz) (grouped by 8 tones):
0 : 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 . . .
--reset :
Clears all statistic counters in ADSL driver
--vendor :
Display Chipset Vendor Details
--cfg :
Display AdslCfgProfile values in MIB
Options for the afelb command
adsl afelb [--time] [--tones] [--signal]
--time :
Sets the time in seconds the test would take to return the result.
--tones :
Optional parameter - Sets the test tone range
Example -–tones 0-20,25-30
--signal :
Sets the test signal to be used
1 Reverb
2 Medley
8 High Crest factor Signal
Result will be available in SNR Mib info and seen using
adsl info –SNR
Options for the qlnmntr command
To Next Page
Loading...
