ZyXEL Communications VMG1312 - Page 53

53
ZyXEL Confidential
www.zyxel.com
Valid values: 0 - 255.
Default value: 0
vci: VCI of the VCC to add.
Valid values: 32 - 65535.
Default value: 35
If <port.vpi.vci> is obmitted then it will display summary state of all existing WAN services.
Options for the --help command
wan –help [<bridge|pppoe|pppoa|ipoe|ipoa>]
<bridge|pppoe|pppoa|ipoe|ipoa>
Display only valid options for the specified protocol.
If it is obmitted then the help for all protocols is diplayed.
EXAMPLES
° Configure a PPPoE interface
ATM interface:
To add:
> wan add interface atm 0.0.35 --linktype eoa
> wan add service atm0/0.0.35 --protocol pppoe --username script --password script --firewall >
enable --nat enable --service ppp --dnsifname ppp0 --gatewayifname ppp0
To delete:
> wan delete service ppp0
> wandelete interface atm 0.0.35
PTM interface:
To add:
> wan add interface ptm 0 --priority normal
> wan add service ptm0/0 --protocol pppoe --username username --password password --service
ppp --dnsifname ppp0 --gatewayifname ppp0
To delete:
> wan delete service ptm0
> wan delete interface ptm 0 --priority normal
° Configure a IPOE configuration using DHCP client
ATM interface:
To add:
> wan add interface atm 0.2.35 --linktype eoa
> wan add service atm0/0.2.35 --protocol ipoe --firewall enable --nat enable --dhcpclient enable
--dnsifname atm0 --gatewayifname atm0
To delete:
> wan delete service atm0
> wan delete interface atm 0.2.35
PTM interface:
To add:
> wan add interface ptm 0 --priority normal