count (0-254)
channel number (0-224)
band a=5G, b=2G
bandwidth n=10, non for 20 & 40
ctl sideband, l=lower, u=upper, default no ctl sideband
constraint
Send an 802.11h Power Constraint IE
Usage: wlctl constraint 1-255 db
rm_req
Request a radio measurement of type basic, cca, or rpi
specify a series of measurement types each followed by options.
example: wlctl rm_req cca -c 1 -d 50 cca -c 6 cca -c 11
Options:
-t n numeric token id for measurement set or measurement
-c n channel
-d n duration in TUs (1024 us)
-p parallel flag, measurement starts at the same time as previous
Each measurement specified uses the same channel and duration as the
previous unless a new channel or duration is specified.
rm_rep
Get current radio measurement report
join_pref
Set/Get join target preferences.
assoc_pref
Set/Get association preference.
Usage: wlctl assoc_pref [auto|a|b|g]
wme
Set WME (Wireless Multimedia Extensions) mode (0=off, 1=on, -1=auto)
wme_ac
wlctl wme_ac ap|sta [be|bk|vi|vo [ecwmax|ecwmin|txop|aifsn|acm <value>] ...]
wme_apsd
Set APSD (Automatic Power Save Delivery) mode on AP (0=off, 1=on)
wme_apsd_sta
Set APSD parameters on STA. Driver must be down.
Usage: wlctl wme_apsd_sta <max_sp_len> <be> <bk> <vi> <vo>
<max_sp_len>: number of frames per USP: 0 (all), 2, 4, or 6
To Next Page
Loading...
