Chapter 7 Wireless
VMG3925-B10C/B30C User’s Guide
100
Finding Out More
See Section 7.10 on page 115 for advanced technical information on wireless networks.
7.2 The General Screen
Use this screen to enable the Wireless LAN, enter the SSID and select the wireless security mode.
Note: If you are configuring the VMG from a computer connected to the wireless LAN and
you change the VMG’s SSID, channel or security settings, you will lose your wireless
connection when you press Apply to confirm. You must then change the wireless
settings of your computer to match the VMG’s new settings.
Click Network Setting > Wireless to open the General screen.
To Next Page
Loading...
